Chicago Pneumatic Rivet Buster CP-4608P 8" Demolition Hammer + 2 Bits

The CP 4608 and 4611 rivet busters offer one of the best power-to-weight ratios on the market.
They also have a teasing throttle for precise control. The teasing throttle is part of the Controlled Power System (CPS). Other features of the system are control of blank firing and control over excessive wear. There are also features for control over premature structural breakage. An indicator groove on the lower sleeve shows when it is time to replace the bumper.
       
All these features have the same objective: to help control the operating cost and avoid unexpected work interruptions.
    
Originally designed for removing rivets and for various other metal applications, rivet busters are now also used for concrete demolition work and bridge work. They have approximately the same hitting power as a 60 lb (30 kg) breaker but only half its weight.
Features & Benefits
Special Boyer valve and long piston stroke (8” or 11”) to deliver the power to handle the toughest jobs
Teasing throttle for precise control
Forged steel handle for long working life under tough conditions.
Hardened steel piston
Stepped cylinder design to prevent accidental ejection of the piston from the cylinder

Technical data

CP 4608P
Blows per minute: 900
Weight: 29.76 lbs
Length: 23.03"
Air Inlet: 1/2" NPT
Recommended Air Pressure: 90 Psi
Recommended Hose Size: 1/2" ID
Air consumption: 21 l/s

This tool will come with 2 reconditioned bits, style will depend on what is available at the time of purchase.