Completely Rebuilt Pneumatic Sand Rammer / Tamper by Ingersoll Rand
Model: IR-34
BPM: 1450
Tool Height: 55" (4Ft. 7in)
Butt: 6" Diameter Steel
CFM: 30
Operating Pressure: 100 PSI
Air Inlet: 1/2"
This tamper is completely rebuilt and is a great tool for building rammed earth homes, tamping poles and fence work as well as packing and shoring up slopes and contours around bunkers or sand traps on golf courses. This tamper is generally used with a 2 stage pull-behind compressor capable of producing the proper cfm rate at 90 psi, so you can continually run the tool and not constantly wait for the compressor to build air pressure back up. It has been lubricated, tested and is in great running order!
All tools (NEW and REBUILT) have a 30 day warranty through us from the day you receive your tool so please use your tool at least once within 30 days of receiving it. The only tools that do not come with a 30 day warranty are tools that are stated as (USED). Used tools are only guaranteed to be in working condition when you receive them! In the event your tool has a warranty issue your tool will be repaired free of charge. If your tool cannot be repaired your tool will be replaced with one of the same make and model or you will be refunded completely. There is a 20% restocking fee on tools that are decided not correct for the job unless a larger or more expensive tool is purchased so please contact us if you are unsure what you need and we can help you determine what you need for the job.
ALL INTERNATIONAL CREDIT CARDS WILL BE CHARGED AN ADDITIONAL 10.00
IF YOU PURCHASE MORE THAN 1 ITEM YOUR CARD WILL ONLY BE CHARGED ONCE.
All customers located in the state of Michigan will be charged 6% Sales Tax